How to Clean Air Ducts Yourself (A Step by Step Guide)

Jan 8

Duct cleaning is the process of cleaning the ducts in your furnace. This isn't it is a DIY project. Professional air cleaning ducts, like Duct Cleaning Colorado Springs Heating & Air, use specialized instruments to clean these difficult-to-reach areas. Duct Cleaning Colorado Springs will show you how to wash the air ducts.

Find a reputable air duct cleaner

You're not alone if you've had the air ducts cleaned before but were not satisfied with the outcome and the strangely short time it took. To address these issues, the National Air Duct Cleaning Association (NADCA) came up with an established method of clean air ducts. This air duct cleaning technique is the best and most efficient method to clean your ducts.

Step 1: Examine the Ductwork

The technician will check the ducts which connect the supply and return registers. This is an excellent starting point for those who would like to view the outcomes before and after. Your professional may utilize cameras to inspect your ductwork before they start.

The professional will repair any issues they observe in the ducts. The expert can repair any damage, kinks, or leaks they spot within your ducts. Aeroseal can be used to stop leaks in your ducts and to prevent further leaks.

Step 2: Create a negative pressure

Your technician transports a vast vacuum system to your furnace. The HEPA vacuum, which has high efficiency and features a powerful suction, generates negative pressure inside your furnace's vents. The hose will be connected by the vacuum gather device to a duct close to the air handler. The technician will require access to the pipe.

To enhance the negative pressure, shut off all supply registers. The vacuum will then be turned on, and each duct will be cleaned one by one.

Step 3: Make the Dust Agitate

Your professional will utilize essential suction equipment to clean the vents as they pass through the process of cleaning air ducts venting through the vent. To remove dust that has settled, these instruments include brushes that rotate and air whipping machines that are pressurized.

Your technician will cleanse the return and supply-side ducts and vents. This will eliminate dust from the main lines allowing it to be more easily cleaned into the vacuum.

Step 4 Clean the System's Remains

Once the ducts and vents have been cleaned The remaining HVAC components will be inspected. The furnace air blower motor, drain pan, evaporator coil, and other components are included. Your technician is expected to clean up after themselves and make sure your rooms aren't dustier than when they first arrived. They'll guide you through the tour of their workplace and let you experience the changes.

It is recommended to clean your air ducts at least every three to five years. It can be done more frequently in the case of severe allergies, mildew, or mold forms in your home or if your house has recently been updated. You'll be able to breathe better with the air duct cleaning process. It gets rid of allergens, dust, and dander. It also benefits your furnace. Clean ductwork will help your furnace last longer and operate more effectively.

For a long time Duct cleaning Colorado Springs Heating & Air has been Colorado Springs, the go-to HVAC service. If you're working with us, you'll be able to see why our customers become long-term clients.

Elevation Mechanical LLC

Colorado Springs, Co

(719) 460-7091

https://elevation-mechanical.com/

https://www.google.com/maps?cid=4099956827925471415

https://www.google.com/search?q=Elevation+Mechanical+LLC&kponly&kgmid=/g/11f9zkvz8c

https://g.page/r/Cbdg7zID-eU4EAg/review

https://www.google.com/maps/place/Elevation+Mechanical+LLC/@38.8756007,-104.8984437,11z/data=!3m1!4b1!4m5!3m4!1s0x871347e2cc3693a1:0x38e5f90332ef60b7!8m2!3d38.8756844!4d-104.7583594

https://www.facebook.com/ElevationMechanicalCo/

https://www.instagram.com/elevationmechanicalllc/

https://www.youtube.com/channel/UCp0-QIx-choq-nb14qJ9ZaA

https://twitter.com/elevationmecllc